Pump components, small gears, water impellers and housings, marine fittings, flanges, low pressure valves and fittings, pipe fittings, plumbing fixtures, ornamental fixtures
Mechanical Properties
M07 - As Continuous Cast
Hardness*
Brinell Hardness (500 kg load)
60
Tensile Strength**
KSI
36
Yield Strength **
KSI (0.5% Ext. under load)
19
Elongation**
% in 2 inch
15
**Test values are nominal approximations and depend on specimen size and orientation.
Physical Properties
Thermal Conductivity
BTU/ (sq ft-ft-hr-F)
41.1
Specific Heat
BTU/lb/ºF @ 68F
.09
Thermal Expansion
Per °F from 68 F to 572 F
.000010
Density
lb/cu in @ 68 F
.318
Electrical Conductivity* (Annealed)
% IACS @ 68 F
15
Modulus of Elasticity
KSI
13,500
*Volume basis
Fabrication Practices
Stress relieving temperature
500 F or 260 C
Time at temperature
1 hour per inch of section thickness
Responds to heat treatment
No
Machinability rating (Free Cutting Brass=100)
84
Suitability for being joined by:
Soldering/Excellent
Brazing/Good*
Oxyacetylene Welding/Not Recommended
Gas Shielded Arc Welding/Not Recommended
Coated Metal Arc Welding/Fair
*Since brazing is performed at temperatures within the hot-short range, strain must be avoided during the brazing and cooling of this alloy.
The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in composition and to manufacturing limitations, they should not be used for specification purposes. See applicable A.S.T.M. specification references.
Please contact us for all your needs of
C83600 Leaded Red Brass
at best prices from India. We are the biggest foundry casting alloy indian manufacturers exporters foundries in Jamnagar of
Copper Alloy No. C83600 
