**Test values are nominal approximations and depend on specimen size and orientation.
Physical Properties
Thermal Conductivity
BTU/ (sq ft-ft-hr-F)
33.9
Specific Heat
BTU/lb/ºF @ 68F
.10
Thermal Expansion
Per °F from 68 F to 572 F
.000009
Density
lb/cu in @ 68 F
.269
Electrical Conductivity* (Annealed)
% IACS @ 68 F
13
Modulus of Elasticity
KSI
15,500
*Volume basis
Fabrication Practices
Stress relieving temperature
600 F or 316 C
Time at temperature
1 hour per inch of section thickness
Responds to heat treatment
Yes
Solution heat treating temperature
1600-1675 F or 870-910 C
Time at temperature
1 hour per inch of section thickness
Quenching medium
Water
Annealing temperature
1150-1225 F or 620-660 C
Time at temperature
1 hour per inch of section thickness
Machinability rating (Free Cutting Brass=100)
60
Suitability for being joined by:
Soldering/Good
Brazing/Good
Oxyacetylene Welding/Not Recommended
Carbon Arc Welding/Fair
Gas Shielded Arc Welding/Very Good
Coated Metal Arc Welding/Good
The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in composition and to manufacturing limitations, they should not be used for specification purposes. See applicable A.S.T.M. specification references.
Please contact us for all your needs of
C95410 Aluminum Bronze
at best prices from India. We are the biggest foundry casting alloy indian manufacturers exporters foundries in Jamnagar of
Copper Alloy No. C95410 
