Brass Copper Fittings (INDIA) Home Email Sitemap
Home About Us Products Resources Email Contact Us Sitemap
Copper Turned Parts | Copper Fittings | Copper Pressed Parts | Copper Casting | Bronze Fittings | Copper Washers | Copper Bronze Grounding Parts | Bronze Casting | Copper Electrical Components | Brass Electrical Components | Brass Turned Parts | Brass Fasteners | Brass Casting | Copper Casting Alloys | Brass Wires Rods Alloys | Brass Hardware Fittings | Brass Sanitary Pipe Fittings | Brass Hose Fittings | Stainless Steel Fittings | Brass Moulding Inserts | Copper Lugs Terminals
Copper Turned Parts
Copper Fittings
Copper Pressed Parts
Copper Casting
Bronze Fittings
Copper Washers
Copper Bronze Grounding Parts
Bronze Casting
Copper Electrical Components
Brass Electrical Components
Brass Turned Parts
Brass Fasteners
Brass Casting
Copper Casting Alloys
Brass Wires Rods Alloys
Brass Hardware Fittings
Brass Sanitary Pipe fittings
Brass Hose Fittings
Stainless Steel Fittings
Brass Moulding Inserts
Copper Lugs Terminals
              Tin Bronze Alloy C90700 (SAE 65)

Tin Bronze Alloy C90700 (SAE 65)   Copper Alloy No. C90700   Tin Bronze Alloy C90700 (SAE 65)

Tin Bronze Alloy , SAE 65 , CDA 907

ASTM B 505
Chemical Composition % by weight
Element Nominal Minimum Maximum
Aluminum - - .005
Antimony - - .20
Copper 89 88 90
Iron - - .15
Lead - - .50
Nickel - - .50
Phosphorus - - .30
Silicon - - .005
Sulfur - - .05
Tin 11 10 12
Zinc - - .50
Applications
Gears, bearings, bushings.
Mechanical Properties
Typical for 3" dia. continuous cast bar
Hardness* Brinell Hardness (500 kg load) 105
Tensile Strength** KSI 42
Yield Strength ** KSI (0.5% Ext. under load) 25
Elongation** % in 2 inch 10
**Test values are nominal approximations and depend on specimen size and orientation.
Physical Properties
Thermal Conductivity BTU/ (sq ft-ft-hr-F) 40.8
Specific Heat BTU/lb/ºF @ 68F .09
Thermal Expansion Per °F from 68 F to 572 F .0000102
Density lb/cu in @ 68 F .317
Electrical Conductivity* (Annealed) % IACS @ 68 F 9.6
Modulus of Elasticity KSI 15,000
*Volume basis
Fabrication Practices
Stress relieving temperature 500 F or 260 C
Time at temperature 1 hour per inch of section thickness
Responds to heat treatment No
Machinability rating (Free Cutting Brass=100) 20
Suitability for being joined by: Soldering/Excellent
Brazing/Excellent*
Oxyacetylene Welding/Fair
Gas Shielded Arc Welding/Fair
Coated Metal Arc Welding/Fair
*Since brazing is performed at temperatures within the hot-short range, strain must be avoided during the brazing and cooling of this alloy.

The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in composition and to manufacturing limitations, they should not be used for specification purposes. See applicable A.S.T.M. specification references.

Nickel Silver Alloy, Bronze Properties, Alloy Steel, Bronze Alloys, Bronze Ingot, Brass Alloys, Copper And Copper Alloys, Copper Alloys, Copper Nickel Alloys, Nickel Alloys, Metal Alloys, Tin Bronze, Leaded Bronze, Naval Brass, Phosphorous Bronze, C90700, Phosphor Bronze, Bronze Rod, C36000, Everdur Related words : Nickel Silver Alloy, Bronze Properties, Alloy Steel, Bronze Alloys, Bronze Ingot, Brass Alloys, Copper And Copper Alloys, Copper Alloys, Copper Nickel Alloys, Nickel Alloys, Metal Alloys, Tin Bronze, Leaded Bronze, Naval Brass, Phosphorous Bronze, C90700, Phosphor Bronze, Bronze Rod, C36000, Everdur
Please contact us for all your needs of

Tin Bronze Alloy C90700 (SAE 65)

at best prices from India. We are the biggest foundry casting alloy indian manufacturers exporters foundries in Jamnagar of

Tin Bronze Alloy C90700 (SAE 65)


Tin Bronze Alloy C90500 Gun Metal Tin Bronze Alloy C90500 Gun Metal High-Leaded Tin Bronze C93700 High-Leaded Tin Bronze C93700
 Designed & maintained by:  www.conextechno.com 
Home | About Us | Products | Resources | Email | Contact Us | Sitemap
                   +