Valve guides and seats in aircraft engines, corrosion resistant parts, bearings, bushings, gears, worm gears, pickling hooks and baskets, agitators.
Mechanical Properties
M07 - As Continuous Cast
Hardness*
Brinell Hardness (500 kg load)
190
Tensile Strength**
KSI
95 min
Yield Strength **
KSI (0.5% Ext. under load)
42 min
Elongation**
% in 2 inch
10
**Test values are nominal approximations and depend on specimen size and orientation.
Physical Properties
Thermal Conductivity
BTU/ (sq ft-ft-hr-F)
24.2
Specific Heat
BTU/lb/ºF @ 68F
.10
Thermal Expansion
Per °F from 68 F to 572 F
.000009
Density
lb/cu in @ 68 F
.272
Electrical Conductivity* (Annealed)
% IACS @ 68 F
8.5
Modulus of Elasticity
KSI
16,000
*Volume basis
Fabrication Practices
Stress relieving temperature
600 F or 316 C
Time at temperature
1 hour per inch of section thickness
Responds to heat treatment
Yes
Solution heat treating temperature
1585-1635 F or 860-890 C
Time at temperature
1 hour per inch of section thickness
Quenching medium
Water or oil quench
Annealing temperature
1150-1225 F or 620-660 C
Time at temperature
1 hour per inch of section thickness
Machinability rating (Free Cutting Brass=100)
50
Suitability for being joined by:
Soldering/Good
Brazing/Fair
Oxyacetylene Welding/Not Recommended
Carbon Arc Welding/Poor
Gas Shielded Arc Welding/Good
Coated Metal Arc Welding/Good
*Since brazing is performed at temperatures within the hot-short range, strain must be avoided during the brazing and cooling of this alloy.
The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in composition and to manufacturing limitations, they should not be used for specification purposes. See applicable A.S.T.M. specification references.
Please contact us for all your needs of
C95500 Nickel Aluminum Bronze
at best prices from India. We are the biggest foundry casting alloy indian manufacturers exporters foundries in Jamnagar of