Blanking, drawing, forming and bending, cold heading, roll threading, welding.
Mechanical Properties
Typical for 1" Rod Hard (25%) Temper
Hardness*
Rockwell F Scales
90
Tensile Strength**
KSI
92
Yield Strength **
KSI
55
Elongation**
% in 2 inch
35
**Test values are nominal approximations and depend on specimen size and orientation.
Physical Properties
Thermal Conductivity
BTU/ (sq ft-ft-hr-F)
39
Specific Heat
BTU/lb/ºF @ 68F
.09
Thermal Expansion
Per °F from 68 F to 212 F
.0000090
Density
lb/cu in @ 68 F
.285
Electrical Conductivity
% IACS @ 68 F
14
Modulus of Elasticity
KSI
17,000
*Volume basis
Fabrication Practices
Capacity for being cold worked
Good
Capacity for being hot formed
Good
Suitability for being joined by:
Soldering/Not Recommended
Brazing/Fair
Oxyacetylene Welding/Not Recommended
Gas Shielded Arc Welding/Good
Coated Metal Arc Welding/Good
Resistance Welding
Spot/Good
Seam/Good
Butt/Good
The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in composition and to manufacturing limitations, they should not be used for specification purposes. See applicable A.S.T.M. specification references.
Please contact us for all your needs of
Aluminum Bronze Alloy C61400
at best prices from India. We are the biggest foundry casting alloy indian manufacturers exporters foundries in Jamnagar of
Copper Alloy No. C61400 
