High thermal and electrical conductivity and high ductility combined with low volatility makes this material indispensable in the electronics industry.
Some typical uses for Copper Alloy 10100 in the electrical and electronic industries are bus bars, bus conductors, wave guides, hollow conductors, lead-in wires and anodes for vacuum tubes, glass to metal seals and others.
Typical for 1" solid diameter Hard (35%) Temper
Rockwell F Scales
Yield Strength **
% in 2 inch
*Hardness conversions are approximate
**Test values are nominal approximations and depend on specimen size and orientation.
BTU/ (sq ft-ft-hr-F)
BTU/lb/ºF @ 68F
Per °F from 68 F to 212 F
lb/cu in @ 68 F
% IACS @ 68 F
Modulus of Elasticity
Capacity for being cold worked
Capacity for being hot formed
Hot forgeability rating (forging brass=100)
Hot working temperature
1400-1600 F or 750-875 C
700-1200 F or 375-650 C
Machinability rating (Free Cutting Brass=100)
Suitability for being joined by:
Oxyacetylene Welding/Not Recommended
Gas Shielded Arc Welding/Fair
Coated Metal Arc Welding/Not Recommended
The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in composition and to manufacturing limitations, they should not be used for specification purposes. See applicable A.S.T.M. specification references.
Please contact us for all your needs of
C10100 Oxygen-Free Copper
at best prices from India. We are the biggest foundry casting alloy indian manufacturers exporters foundries in Jamnagar of