Brass Copper Fittings (INDIA) Home Email Sitemap
Home About Us Products Resources Email Contact Us Sitemap
Copper Turned Parts | Copper Fittings | Copper Pressed Parts | Copper Casting | Bronze Fittings | Copper Washers | Copper Bronze Grounding Parts | Bronze Casting | Copper Electrical Components | Brass Electrical Components | Brass Turned Parts | Brass Fasteners | Brass Casting | Copper Casting Alloys | Brass Wires Rods Alloys | Brass Hardware Fittings | Brass Sanitary Pipe Fittings | Brass Hose Fittings | Stainless Steel Fittings | Brass Moulding Inserts | Copper Lugs Terminals
Copper Turned Parts
Copper Fittings
Copper Pressed Parts
Copper Casting
Bronze Fittings
Copper Washers
Copper Bronze Grounding Parts
Bronze Casting
Copper Electrical Components
Brass Electrical Components
Brass Turned Parts
Brass Fasteners
Brass Casting
Copper Casting Alloys
Brass Wires Rods Alloys
Brass Hardware Fittings
Brass Sanitary Pipe fittings
Brass Hose Fittings
Stainless Steel Fittings
Brass Moulding Inserts
Copper Lugs Terminals
              Copper-Nickel C70600 (90/10)

Copper-Nickel C70600 (90/10)   Copper Alloy No. C70600   Copper-Nickel C70600 (90/10)

Copper Nickel 90/10

Chemical Composition % by weight
Element Nominal Minimum Maximum
Copper 88.6 Rem. Rem.
Lead - - .05
Iron 1.4 1 1.8
Zinc - - 1*
Nickel 10 9 11
Manganese .60 .30 .80
*When the product is subsequent welding applications and so specified by the purchaser, Zn shall be .50% max., Pb .025% max., P .02% max., Sulfur .02% max. and Carbon .05% max.
Applications
Condensers, condenser plates, distiller tubes, evaporator and heat exchanger tubes, salt water piping, ferrules.
Common Fabrication Processes
Forming and bending, welding.
Mechanical Properties
Typical for 1" OD Light Drawn Tube x .065" wall thickness
Hardness* Rockwell F Scales 72
Tensile Strength** KSI 60
Yield Strength ** KSI 57
Elongation** % in 2 inch 10
**Test values are nominal approximations and depend on specimen size and orientation.
Physical Properties
Thermal Conductivity BTU/ (sq ft-ft-hr-F) 26
Specific Heat BTU/lb/ºF @ 68F .09
Thermal Expansion Per °F from 68 F to 212 F .0000095
Density lb/cu in @ 68 F .323
Electrical Conductivity % IACS @ 68 F 9
Modulus of Elasticity KSI 18,000
*Volume basis
Fabrication Practices
Capacity for being cold worked Good
Capacity for being hot formed Good
Suitability for being joined by: Soldering/Excellent
Brazing/Excellent
Oxyacetylene Welding/Fair
Gas Shielded Arc Welding/Excellent
Coated Metal Arc Welding/Good
Resistance Welding Spot/Good
Seam/Good
Butt/Excellent
The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in composition and to manufacturing limitations, they should not be used for specification purposes. See applicable A.S.T.M. specification references.

C70600, 90 10 Cupro Nickel, Copper Nickel Tubes, Nickel Tubes, Nickel Alloys, Copper Alloys, Copper, Admiralty Brass Tubes, Copper Nickel Tube, C71500, C44300, Nickel Tubing, Cunifer, 70 30 Copper Nickel, Copper Nickel Alloys, Nickel Pipes, Nickel Tube, C68700, C10100 Copper, Copper Sheet Prices Related words : C70600, 90 10 Cupro Nickel, Copper Nickel Tubes, Nickel Tubes, Nickel Alloys, Copper Alloys, Copper, Admiralty Brass Tubes, Copper Nickel Tube, C71500, C44300, Nickel Tubing, Cunifer, 70 30 Copper Nickel, Copper Nickel Alloys, Nickel Pipes, Nickel Tube, C68700, C10100 Copper, Copper Sheet Prices
Please contact us for all your needs of

Copper-Nickel C70600 (90/10)

at best prices from India. We are the biggest foundry casting alloy indian manufacturers exporters foundries in Jamnagar of

Copper-Nickel C70600 (90/10)


Manganese Bronze C67500 Manganese Bronze C67500 Copper-Nickel C71500 (70/30) Copper-Nickel C71500 (70/30)
 Designed & maintained by:  www.conextechno.com 
Home | About Us | Products | Resources | Email | Contact Us | Sitemap
                   +