Hardware : Gears and pinions. Industrial : Automatic high speed screw machine parts.
Mechanical Properties
Typical for 1" rod half hard temper (20%)
Hardness*
Rockwell F Scales
78
Tensile Strength**
KSI
48
Yield Strength **
KSI
45
Elongation**
% in 2 inch
25
**Test values are nominal approximations and depend on specimen size and orientation.
Physical Properties
Thermal Conductivity
BTU/ (sq ft-ft-hr-F)
.67
Specific Heat
BTU/lb/ºF @ 68F
.09
Thermal Expansion
Per °F from 68 F to 212 F
.0000114
Density
lb/cu in @ 68 F
.307
Electrical Conductivity
% IACS @ 68 F
26
Modulus of Elasticity
KSI
14,000
*Volume basis
Fabrication Practices
Capacity for being cold worked
Poor
Capacity for being hot formed
Fair
Hot forgeability rating (forging brass =100)
N/A
Hot working temperature
1300-1450 F or 700-800 C
Annealing temperature
800-1100 F or 425-600 C
Machinability rating (Free Cutting Brass=100)
100
Suitability for being joined by:
Soldering/Excellent
Brazing/Good
Oxyacetylene Welding/Not Recommended
Gas Shielded Arc Welding/Not Recommended
Coated Metal Arc Welding/Not Recommended
Resistance Welding
Spot/Not Recommended
Seam/Not Recommended
Butt/Fair
The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in composition and to manufacturing limitations, they should not be used for specification purposes. See applicable A.S.T.M. specification references.
Please contact us for all your needs of
C36000 Free-Cutting Brass
at best prices from India. We are the biggest foundry casting alloy indian manufacturers exporters foundries in Jamnagar of
Copper Alloy No. C36000 
