Brass Copper Fittings (INDIA) Home Email Sitemap
Home About Us Products Resources Email Contact Us Sitemap
Copper Turned Parts | Copper Fittings | Copper Pressed Parts | Copper Casting | Bronze Fittings | Copper Washers | Copper Bronze Grounding Parts | Bronze Casting | Copper Electrical Components | Brass Electrical Components | Brass Turned Parts | Brass Fasteners | Brass Casting | Copper Casting Alloys | Brass Wires Rods Alloys | Brass Hardware Fittings | Brass Sanitary Pipe Fittings | Brass Hose Fittings | Stainless Steel Fittings | Brass Moulding Inserts | Copper Lugs Terminals
Copper Turned Parts
Copper Fittings
Copper Pressed Parts
Copper Casting
Bronze Fittings
Copper Washers
Copper Bronze Grounding Parts
Bronze Casting
Copper Electrical Components
Brass Electrical Components
Brass Turned Parts
Brass Fasteners
Brass Casting
Copper Casting Alloys
Brass Wires Rods Alloys
Brass Hardware Fittings
Brass Sanitary Pipe fittings
Brass Hose Fittings
Stainless Steel Fittings
Brass Moulding Inserts
Copper Lugs Terminals
              C65500 High Silicon Bronze

C65500 High Silicon Bronze   Copper Alloy No. C65500   C65500 High Silicon Bronze

High Silicon Bronze A , CDA 655 Everdur

Chemical Composition % by weight
Element Nominal Minimum Maximum
Copper 97 Rem. Rem.
Lead - - .05
Iron - - .80
Zinc - - 1.5
Manganese .90 .50 1.3
Silicon 3 2.8 3.8
Nickel - - .60
Applications
Aircraft : Hydraulic pressure lines.
Hardware : Bolts, burrs, butts, clamps, cotter pins, hinges, marine hardware, nails, nuts, pole line hardware, screws.
Industrial : Bearing plates, bushings, cable, channels, chemical equipment, heat exchanger tubes, kettles, piston rings, tanks, rivets, screen cloth and wire, screen plates, shafting.
Marine : Propeller shafts.
Common Fabrication Processes
Blanking, drawing, forming and bending, heading and upsetting, hot forging and pressing, roll threading and knurling, shearing, squeezing and swaging.
Mechanical Properties
Typical for 1" Rod Hard (36%) Temper
Hardness* Rockwell F Scales 92
Tensile Strength** KSI 92
Yield Strength ** KSI 55
Elongation** % in 2 inch 22
**Test values are nominal approximations and depend on specimen size and orientation.
Physical Properties
Thermal Conductivity BTU/ (sq ft-ft-hr-F) 21
Specific Heat BTU/lb/ºF @ 68F .09
Thermal Expansion Per °F from 68 F to 212 F .0000100
Density lb/cu in @ 68 F .308
Electrical Conductivity % IACS @ 68 F 7
Modulus of Elasticity KSI 15,000
*Volume basis
Fabrication Practices
Capacity for being cold worked Excellent
Capacity for being hot formed Excellent
Hot forgeability rating (forging brass =100) 40
Suitability for being joined by: Soldering/Good
Brazing/Excellent
Oxyacetylene Welding/Good
Gas Shielded Arc Welding/Excellent
Coated Metal Arc Welding/Fair
Resistance Welding Spot/Excellent
Seam/Excellent
Butt/Excellent
The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in composition and to manufacturing limitations, they should not be used for specification purposes. See applicable A.S.T.M. specification references.

Silicon Bronze, Bronze Alloys, Bronze Properties, Silicon Bronze Ingots, Bronze Wire, Aluminium Bronze, High Temperature Alloys, Nickel Aluminum Bronze, Bronze Rod, Phosphor Bronze Wire, Everdur, Nickel Silver Alloy, Beryllium Copper Alloys, Tantalum Wire, Brass Alloys, Nickel Alloys, Copper Nickel Alloys, Metal Alloys, Copper Alloys, Nickel Wire Related words : Silicon Bronze, Bronze Alloys, Bronze Properties, Silicon Bronze Ingots, Bronze Wire, Aluminium Bronze, High Temperature Alloys, Nickel Aluminum Bronze, Bronze Rod, Phosphor Bronze Wire, Everdur, Nickel Silver Alloy, Beryllium Copper Alloys, Tantalum Wire, Brass Alloys, Nickel Alloys, Copper Nickel Alloys, Metal Alloys, Copper Alloys, Nickel Wire
Please contact us for all your needs of

C65500 High Silicon Bronze

at best prices from India. We are the biggest foundry casting alloy indian manufacturers exporters foundries in Jamnagar of

C65500 High Silicon Bronze


C36000 Free-Cutting Brass C36000 Free-Cutting Brass C38500 Architectural Bronze C38500 Architectural Bronze
  
Home | About Us | Products | Resources | Email | Contact Us | Sitemap
                   +